Category Archives: Tool & Duty Belts

Faithfull End Cutter Plier Holder belt fitting

This Faithfull End Cutter Plier Holder is made from high-quality hide leather to last and provide dependable service. Its steel fitment is designed to hold end cutting steel erectors pliers and similar cutters. Fits most belts. Overall Size: 150mm x 100mm (6 x 4in).

Bi-Metal 2In Black Titanium Leather Belt

A 2 in wide black leather belt with steel buckle and riveted at all the stress points. For use with BMT109 scaffold spanner holder.

Faithfull Webbing Belt – 2in Wide

This Faithfull 50mm Webbing Belt with a buckle. Adjustable for waist sizes 34-44 inch.

Faithfull NP2 Nail Pouch – Double Pocket

The Faithfull heavy-duty suede nail pouch divided into two pockets.Double stitched for strength and rivet reinforced at stress points.Complete with webbing belt. Size: 250 mm x 380 mm (10in x 15in)

Faithfull Single Tool Nail Pouch

The Faithfull Single Tool & Nail Pouch, made from heavy-duty leather, double stitched and with rivet reinforcement at stress points. Has a belt loop for belts up to 2in wide. Has two large pockets for nails, three pockets for small tools and a hammer loop. Size: 250 x 280mm (10 x 11in).

Faithfull Double Tool Nail Pouch

Made from heavy-duty leather this tool pouch is double stitched for strength and riveted at stress points.Webbing belt is attached and will fit waists from 29in to 46in.Has 10 pockets for tools and nails, tape clip and two hammer loops. Size: 215 mm x 500 mm (8.1/2in x 20in)

Faithfull Nail Pouch – Single Pocket

The Faithfull Single Pocket Nail Pouch has been made to a high standard using heavy-duty split suede. Top edged and stitched large pocket, stress points are rivet reinforced for durability. Looped for attaching to a separate belt. Size: 240 x 220 mm (9.1/2 x 9in).

Faithfull HH2 Swivel Hammer Holder

The Faithfull Swivel Hammer Holder has a base made from quality hide leather, to last and provide dependable service. The steel swivel ring accommodates most hammers and adjusts to suit the body angle. Fits most belts. Size: 150 x 100mm (6 x 4in).

Faithfull Scaffold Spanner Holder – Double

The Faithfull Double Scaffold Spanner Holder, made to a high specification using quality heavy-duty hide. Made to last and provide dependable service. Two loops for scaffold spanners or socket bars. Fits most belts. Size: 150 x 100mm (6 x 4in).

Kunys DW1018 3 Pocket Drywall Pouch

Drywall Pouch with no hammer holder loop. Ideal for use when fitting plasterboard as there are no hard surfaces to damage a plasterboard sheet while being carried. Made from durable split grain leather. Three pouches. (Large, Medium and Small) reversed for easy access. Fits any belt up to 3 in wide. Double rivet reinforced at

Kunys HM219 Leather Swing Hammer Holder

Made from top grain leather and heavy-duty steel. Cradle design keeps hammer secure.Swing feature keeps hammer vertical.Fits belts up to 2.3/4 in wide.

Kunys EL5623 3inch Padded Comfort Belt

Kuny’s EL-5623 3in Wide Padded heavy-duty double layer lightweight fabric comfort belt, will not rot, crack, harden or be affected by mildew. It features a foam padding and a 2 in double tongue metal roller buckle and a grip strip fastening system holds pouches securely in place. Belt width: 3 in.Fits waist sizes: 29 in

Kunys AP661 Split Grain Water Repellant Apron

The Kuny’s AP661 Split Grain Water Repellent Tool Belt is made from heavy water repellent split grain leather. Five reversed nail pockets for easy access (two large and three small). Deep centre pockets for tapes or other tools. Two heavy steel hammer holders with six smaller pockets for pencils, utility knife, markers etc. Heavy-duty belt

Kunys EL1509 Professional Electricians Zip Pouch 21 Pocket

21 Pocket Zippered Pro Electrician’s Tool Pouch. Double layer of rugged lightweight 600D polyester fabric. Zippered top flap prevents loss of tools when carrying (or not in use). With ergonomic rubber handle and padded shoulder strap design and zippered 8 in x 5 in padded back pocket for documents or drawings/writing pads. Outside pocket for

Kunys SW1105 5 Pocket Phone & Tool Holder

5 Pocket Mobile Phone/Tool Holder. Made from polyester fabric and ballistic nylon. The mobile phone, tool and accessory holder you can HANG or STRAP or CLIP on work belts, web braces, trousers etc. Securely holds small tools and accessories like pliers, mini-flashlights etc.Versatile 3-way attachment feature.

Kunys EL892 Back Support with Suspenders

Kuny’s Elastic Back Support Belt with a 203mm (8in) wide heavy-duty elastic back panel and 127mm (5in) wide heavy elastic side bands for perfect fit. It has 32mm (1.1/4in) wide elastic adjustable braces with 4 Internal stays which provide extra support and tapered front panels for comfort while bending. Fits waist sizes: 29in to 46in.

DeWalt DWC14001 Belt

DEWALT DWC14001 Men’s Belt with Nickel buckle clasp. Made from polypropylene material. Avalible in One size.

Kunys HM220 Leather Snap in Hammer Holder

Snap-In Swinging Hammer Holder Cradle design keeps hammer secure.Swing feature keeps hammer vertical.Fits belts up to 2.3/4 in wide. Cradle design keeps hammer secure. Swing feature keeps hammer vertical. Fits belts up to 2.3/4 in wide. Top grain leather.

Kunys PH38 Utility Pouch

PH 38 Misc Tool Pouch.Made from full grain leather.Designed to fit assorted utility items such as pens, markers, tape, utility knife etc.2 in wide belt slots. Rivet reinforced.

Kunys AP622 14 Pocket Split Grain Leather Carpenters Apron

Kunys AP-622a Carpenter’s apron is made from durable split grain leather with contrasting black stitching, rivets and hammer holders. Its has carry handles allow easy handling/storage with a 2 inch wide heavy nylon belt with twist-loc buckle and double rivets at all stress points. – 5 Reversed nail pockets for easy access. – 2 Large